Velox Plus Propeller Antifouling Kit

kr 1.498

Velox Plus is an antifouling coating system developed to protect propellers, stern drives, shafts, outdrives, struts, jet pumps and other metallic parts immersed in the water. Using Velox Plus will keep your propeller clean, thus increasing fuel economy and boosting vessel performance.


SKU Velox Plus Propeller Antifouling Kit Category


Velox Plus is an antifouling coating system developed to protect propellers, stern drives, shafts, outdrives, struts, jet pumps and other metallic parts immersed in the water. Velox Plus works because of excellent adhesion to metal below the waterline. A unique feature of Velox Plus is that it is not degraded by galvanic currents that are typically responsible for paint detachment. Using Velox Plus will keep your propeller clean, thus increasing fuel economy and boosting vessel performance. Approximately 60% cost savings compared to “non-stick” or “release” coatings.

Unlike current “release” coatings on the market Velox Plus is repairable, no need to start over each time bare metals are exposed. Due to Velox Plus single part primer and no catalyst, there is absolutely no rush allowing you to take your time giving yourself a quality application. No maximimum time betwen coats or before launching, allowing you to have a flexible schedule for when you paint. There is no waste either, remaining Velox Plus can be used during next haul out, saving you money. Can be used on any size boat, from small yachts to large commercial vessels.

Velox Plus can be applied with a brush or sprayed on. DO NOT APPLY ONTO OTHER ANTIFOULING PAINTS. Velox Plus can be applied over an existing Velox Plus base coat. Two or more coats of Velox Plus are needed. Two sizes available, 0.25 or 0.50 liter cans. Available in white or black.

 

Kit Includes

    • 1 qty – 0.25 liter can of Metal Primer
    • 1 qty – 0.5 liter can of Velox Plus Paint
    • 2 qty – 1 quart mixing cup
    • 2 qty – rollers
    • 1 qty – brush
    • 2 qty – stir sticks
    • 6 qty – gloves

 

COVERAGE

Below is a chart on the approximate primer and paint coverage. Please note that these are approximate and actual coverage may vary.

Coverage Per Coat Number of Coats Specific Gravity
50 – 100 sq. ft. 2 – 3 1.20 – 1.30

*Two or more coats of Velox Plus are needed.

Propeller Approximate Liters
16″ four blade propeller 1/8 liter for each coat
30″ four blade propeller 1/4 liter for each coat
40″ four blade propeller 1/2 liter for each coat

 

Other Coverage

    • Flat surfaces, trim tab and rudder coverage is approximately 10 square meters (107 sq.ft) per liter.
    • Propeller or stern drive coverage is approximately 5 square meters (53 sq.ft) per liter.

 

TECHNICAL DATA

 

Dry Time (Using 68°F, primer & two coats of paint)

Primer 3 hours
Paint (1st coat) 3 hours
Paint (Final coat) 12 hours
Total Time 18 hours

*Additional coats of paint will add 3 hours per coat unless final coat.

 

Here’s our recommendation on how much Velox Plus you should get per can of Metal Primer.

Metal Primer Velox Plus
0.25L  0.5L
0.5L 1L

 

Downloads

Velox Plus MSDS Click here to download
Velox Plus Brush Application Instructions Click here to download
Velox Plus Spray Application Instructions Click here to download

Du vil kanskje også like

Privacy Preference Center